contact us
Fitting Bixpy uphaul to rudder

1: With the bracket fitted snugly against the headstock drill the 6mm mounting hole
2: Before bolting the bracket on, attached the shockcord between the blade and the bracket
3: Bolt the bracket on, put the disc between the blade and the bracket
4: Drill the 4.5mm hole for the stopper bolt, position the bracket against the headstock as per photo 3, drill hole position as per photo 3
5: Fit the uphaul cord as per photos 4 and 5 below.

Fitting Bixpy uphaul to Viking rudder

 

Fitting Bixpy uphaul to Viking rudder

 

Fitting Bixpy uphaul to Viking rudder

The stopper bolt position is very important, position it as in the photo above. Drill a 4.5mm hole so the bolt treads in. 

Fitting Bixpy uphaul to Viking rudder

 

Fitting Bixpy uphaul to Viking rudder